Sold out

Rockford P300-8P Punch Series Compact 300W Powered 8" Car Audio Subwoofer

Notify me when this product is available:

Rockford Fosgate Punch P300-8P 300 Watts RMS, Loaded 10" Powered Sealed Subwoofer Enclosure

The P300-8P powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features an 8” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-8P is the right one for the job! The P300-10 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.

General Features:

  • High-Efficiency, Low Current Amplifier Design
  • Optimized 8" Low Impedance Woofer
  • 300 Watt Class-D Amplifier with Optimized "Closed Loop" Design
  • Adjustable 12db/Octave low pass crossover
  • On-Board Phase Switch
  • Intelligent auto turn on/off function
  • Robust Power/Ground connections
  • Quick Input Connections for Easy Removal
  • On-Board Adjustable Bass EQ
  • Remote bass level control included
  • Separate low level and speaker level inputs
  • Precision Constructed MDF Enclosure with Heat Activated Vinyl Finish
  • Thermal and over/under voltage protection
  • Slim Design For Truck Applications
  • CEA-2031 Compliant
  • CEA-2006 Compliant
  • Frequency Response: 30Hz-200Hz
  • Power Handling (RMS): 300W
  • Enclosure Type: Vented
  • Crossover Controls: Variable 50Hz-200Hz, 12dB/Octave Butterworth
  • Tone Controls: Bass Boost 0dB-+12dB
  • Phase Control: 0-180
  • Input Impedance: 20k Ohms

What is in the box:

  • Rockford Fosgate P300-8P owner's manual
  • Powered subwoofer enclosure
  • Remote Punch Level Control (w/ mounting plate and 2 screws)
  • 16.5' Remote cable (3.5mm stereo plugs on both ends)
  • Power/ground terminal block
  • 12" Input harness (4-pin Molex - RCA)
  • 25" Strip of hook-and-loop fastener
  • 3mm Allen key
  • Four 10A ATO fuses (two installed / two spare)
  • Installation manual

    ⚠️Warning:
    Cancer and Reproductive Harm-Www.P65warnings.Ca. Gov