Sale

Alpine Type-X Bundle 1Pair X-S65C 6.5" Component 1Pair X-S65 6.5" Coax X-A70F 700W and 4 Gauge Amp Kit

Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp, and Absolute KIT4 4 Gauge Amp Wiring Kit

Alpine Type-X Bundle 1-Pair X-S65C 6.5" Component, 1-Pair X-S65 6.5" Coax, X-A70F 700W 4-Ch Amp and Wiring - This bundle includes a pair of Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers, a pair of Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way Speakers, an Alpine X-A70F X-Series 4/3/2 Channel Power Density Amplifier, a wiring kit, a pry kit, and an Alpine cozy.

Alpine X-S65C X-Series 6.5 Inch Component 2-Way Speakers
CTA-2031 Specifications: 120W RMS, 360W Peak, 4 Ohm

General Features:

  • 6.5 X-Type 2-Way Component System
  • Power Handling:
  • Max: 720 W per set/ 360 W per side
  • RMS: 240 W per set/ 120 W per side
  • Recommended power range: 10 - 120W RMS
  • Hi-Res Audio compatible
  • Nano-fiber woofer cone
  • H.A.M.R. surround
  • 1" carbon graphite tweeter
  • Adjustable tweeter attenuation: 0dB, +3dB, -3dB
  • Adjustable tweeter phase: Normal or reverse
  • A-Pole type neodymium magnet
  • Top-mount depth: 2-5/16"
  • Cutout Dimensions: 5-13/32"
  • 4 ohms impedance
  • Frequency Response: 55 - 50,000 Hz
  • Sensitivity: 89 dB
  • Authorized Internet Dealer

Alpine X-S65 X-Series 6.5 Inch Coaxial 2-Way Speakers

SPECIFICATIONS
Woofer: 6-1/2" cone
Tweeter: 1" Carbon Graphite
Maximum Peak Power: 330 Watts
Maximum RMS Power: 110 Watts
impedance: 4 ohms
Sensitivity: 89 dB SPL (1W @ 1m)
Frequency Response: 55 Hz to 50 kHz
Mounting Depth/Drop-in Mounting: 2-5/16- (5.9cm)
Cutout Diameter: 5-13/32- (13.7cm) circle
Recommended Amplification: up to 110 watts RMS per channel
Warning: Both products contain a high-performance tweeter. If there is a tweeter already installed in your car, then you must disconnect its terminals. If you leave the original tweeter connected and connect this product in parallel, then a fault may develop in this product, so you are strongly recommended not to do so.

Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable Amplifier

Alpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.
The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.
General Features:

  • Alpine X-Series X-A70F
  • Class-D Full Range 2 ohm Stable 4-Channel Amplifier
  • RMS Power Rating:
    • 4 ohms: 120 watts x 4 Channel
    • 2 ohms: 175 watts x 4 Channel
    • 1 ohm: ------------N/A-----------
    • Bridged, 4 Ohms: 350 Watts X 2 Channel
  • Total power output: 700 watts
  • CEA-2006 Compliant Amplifier
  • Hi-Res Audio compatible
  • Wired remote level control, Alpine RUX-KNOB.2, available
  • Included plastic covers available to offer a brushed aluminum finish around the edges
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • 4/3/2 channel operation
  • Speaker-level (high-level) inputs
  • Preamp Outputs
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Heavy-duty aluminum alloy heat-sink
  • Input sensitivity
    • High level: .4 - 10V
    • Low level: .1 - 4V
  • Frequency Response: 10 - 60,000
  • Total Harmonic Distortion (THD): .07%
  • Signal to Noise Ratio: >106dB
  • Variable low-pass filter: 50 - 400Hz, -24dB/octave
  • Variable subsonic filter: 50 - 40Hz, -24dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
  • Fuse Rating: 35A x 3
  • 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
  • Dimensions: 11-3/4"W x 7-5/8"L x 2"H
  • Authorized Dealer
  • 1-year Manufacturer's Warranty
What is in the X-A70M package:
  • 4-Channel amplifier
  • Two 35A ATO fuses (installed)
  • Terminal Cover Left
  • Terminal Cover Right
  • Terminal Cover Front
  • Battery connector plug
  • 2 Speaker connector plugs
  • Logo Plate (self-adhesive)
  • 4 Self-tapping screws (Length 3/4")
  • 2mm Allen wrench
  • 4mm Allen wrench
  • Owner's Manual
  • Alpine Verification Certificate
  • Limited Warranty
  • To Customers sheet
  • X-A70M owner's manual

⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov